Home  /  Compare  /  Factoring vs Government Contract Line of Credit

Government Contract Factoring vs Line of Credit: Which Fits Your Contract?

In a government contract factoring vs line of credit decision, the line wins on cost and the factor wins on access. On a typical 45-day federal payment cycle, factoring annualizes in the mid-20s while a contract-backed line prices near Prime plus a spread, roughly half as much. But the line needs financial statements and history, and factoring needs only an accepted invoice, which is why most new contractors start with one and graduate to the other.

Written by Select Loan Advisors editorial teamLast reviewed 2026-09-15Editorial policy

This page is part of our business loan comparison series. Funding partners pay us at closing, and because factors and lenders pay brokers differently, we show every offer as an APR-equivalent with total dollars; see how we're compensated. Amounts, rates and terms shown are illustrative examples, not an offer or a quote. Select Loan Advisors is not a lender; funding partners set all terms.

Side by side

Government contract factoring Contract-backed line of credit
What it is Sale of an accepted government invoice to a factor at a discount; not a loan Revolving credit secured by an assignment of contract proceeds; a loan
What you need A signed award and an accepted invoice Two years of financials, a funded award, a personal guarantee, usually a 680+ FICO
Advance 80%–95% of invoice face (70%–80% on construction) Borrowing base of 70%–90% of eligible receivables, or a limit sized to the peak gap
Cost (illustrative) 1%–3% of the invoice per 30 days; most 1.5%–2.5%; about 24% annualized on a 45-day cycle Bank-priced lines Prime + 1.75% to Prime + 9.75% (8.50%–16.50% at 6.75% prime); online 10%–99% APR; plus origination and monitoring fees
Covers the pre-invoice gap No Yes, up to the limit
Speed Setup 3–10 business days; then 24–48 hours per invoice 1–3 weeks (specialty lender) to 2–6 weeks (bank); same-day draws after
Who collects from the agency The factor, under an Assignment of Claims You; proceeds flow to a lender-controlled account
Balance sheet Receivables sold; no debt recorded Debt
Best for New contractors, first awards, thin history, one large contract Established firms, multiple contracts, margins under 15%, multi-year growth

Ranges reflect the International Factoring Association, Wells Fargo's line pricing and the NerdWallet rate survey; prime is 6.75% per Commerce Bank.

How each one works on a federal award

Government contract factoring is a sale, not a loan, as the IFA defines it. You invoice the agency, the factor verifies acceptance and advances most of the face value within a day or two, and the agency pays the factor directly under an Assignment of Claims filed per FAR 32.802. The factor then releases the reserve minus its fee. Under standard recourse terms, you owe the advance back if the agency refuses to pay for a reason the factor did not cause.

A contract-backed line of credit is a loan from one of the contract financing lenders that underwrite the award, not just the invoice. The lender takes the same assignment, sizes a limit to your projected deficit, and lets you draw before the first invoice exists. Interest accrues on the drawn balance only; agency payments land in a controlled account and pay the line down.

Both rely on the Assignment of Claims Act (31 U.S.C. § 3727) and on 5 CFR 1315, which makes payment due 30 days after a proper invoice. The difference is who bears the pre-invoice gap and how the money is priced.

Government contract factoring vs line of credit on a real payroll gap

An illustrative one-year services award: $1.2 million, billed $100,000 monthly on the first business day of the following month, with $15,000 of weekly payroll from week one. The agency pays 45 days after invoice on average.

The cash gap: four payrolls ($60,000) before the first invoice, then six or seven more ($97,500) before the first payment lands on day 76. Peak deficit is about $157,500; the steady-state gap is six to seven weeks of payroll.

Factoring at a 90% advance and 1.75% per 30 days:

  • Cannot fund days 1–30: you need $60,000 of your own cash or a mobilization advance.
  • Day 33: $90,000 advance on the first invoice.
  • Fee per invoice at 45 days: 2.625% × $100,000 = $2,625. Twelve invoices: $31,500, or 2.6% of contract value.
  • Annualized: about 21% on the invoice face, closer to 24% on the cash actually advanced.

Contract-backed line of $200,000 at 12.00% (Prime + 5.25%) with a 1% origination fee:

  • Draws from week one; peak balance about $160,000 in month three; average balance over the year roughly $110,000.
  • Interest: $110,000 × 12% = $13,200; origination $2,000; monitoring fees, say, $1,200. Total: $16,400, or 1.4% of contract value.

The line costs about half and covers the gap the factor cannot; that case holds at almost any rate under 20%. The case for factoring is that the firm in this example may not qualify for the line. A new 8(a) firm with no prior-year financials, or a contractor whose last two years show a loss, will be offered factoring and nothing else from the bank side.

When factoring wins

  • You have an award and no history. Factors underwrite the agency; lenders underwrite you.
  • The contract is short. A six-month award does not justify a line's setup and fees.
  • Revenue is lumpy. Factoring costs nothing between invoices; an unused line still carries fees.
  • You need money this week. An accepted invoice becomes cash in 24 to 48 hours.
  • Your balance sheet matters to a surety. Sold receivables are not debt, which can help bonding capacity.

When the line wins

  • Margins are thin. At a 12% gross margin, factoring's 2.6% of revenue is a fifth of profit; the line's 1.4% is an eighth.
  • The pre-invoice gap is large. Mobilization and hiring before billing need a draw, not an advance.
  • You hold several contracts. One facility against all receivables beats factoring invoice by invoice.
  • You plan to hold the facility for years. Line pricing improves with history faster than factoring pricing does.
  • You can wait 2 to 6 weeks. If the gap opens in ten days, the line will not be there.

The hybrid most contractors use

The sequence that works for many firms is not either-or. Factor the first contract, with a mobilization advance for the first 30 to 60 days if needed, while building twelve months of clean invoices and agency payment history. Then move to a contract-backed line and let the factoring agreement lapse; some lenders refinance the factor's reserve at closing so there is no gap.

Two cautions. Most factoring agreements carry a minimum term and an early termination fee, which the IFA lists among common charges; read for both. And FAR 32.802 allows one assignee per contract, so switching means the factor releases its assignment and the lender files a new one, with notice to the contracting officer, disbursing officer and any surety. Build two to three weeks into the transition.

Prime vs subcontractor. Everything above assumes a prime contract. A subcontractor has no claim against the government, so its factor or lender relies on the prime acknowledging a commercial assignment; advances run lower and a line is harder to get.

Who this is not for

  • Awards that already carry progress or performance-based payments. Government financing at 85% of costs under FAR 32.501-1 or up to 90% of price under FAR 32.1004 is interest-free. Take it first.
  • Gross margins under 10%. Neither structure fits; reprice the work.
  • Invoices in dispute. Factors will not advance and lenders exclude them from the borrowing base.
  • Contractors who can wait for an SBA CAPLine. The Contract CAPLine under 13 CFR 120.390 is cheaper than both, capped at base plus 3.0% above $350,000, if 60 to 90 days is acceptable.

See how business loan brokers work for what happens after the soft credit pull.

Sources

Common questions

Is factoring or a line of credit cheaper for a government contractor?

The line, usually by about half, when you qualify. Bank-priced lines run Prime + 1.75% to Prime + 9.75%, or 8.50%–16.50% at today's 6.75% prime, with interest on the drawn balance only. Factoring at 1.5%–2.5% per 30 days annualizes in the 18%–30% range on a typical 30- to 60-day federal cycle. These figures are illustrative; funding partners set terms.

Can I have factoring and a line of credit at the same time?

Not on the same contract, in practice. FAR 32.802 permits only one assignee of a federal contract's payments, and both the factor and the lender need that assignment. Contractors do run factoring on one contract and a line on another, and some lenders will take over a factored contract at closing by paying off the factor's reserve.

Does factoring hurt my chances of getting a line later?

No. A year of factored invoices with clean agency payments is exactly the history a contract lender wants to see. Lenders will ask for the factoring agreement's termination terms and confirm the factor will release its assignment and UCC filing at closing. Undisclosed factoring, however, is a problem, so tell the lender up front.

What if I am a subcontractor, not a prime?

Both structures still exist, but the Assignment of Claims Act does not apply because the government owes you nothing directly. Your factor or lender relies on the prime acknowledging a commercial notice of assignment and verifying your invoices. Expect advances of 75%–90% instead of 80%–95%, fees toward the top of the range, and fewer lenders offering a line.

Which should a new 8(a) or first-time contractor choose?

Usually factoring, paired with mobilization funding if the pre-invoice gap is large, because it is the structure a firm without prior-year financials can actually get. Treat it as a bridge: keep invoices clean, collect on time, and apply for a contract-backed line or SBA CAPLine once twelve months of performance exist.

Find out where you stand

Send us the award, billing schedule and weekly payroll. We will price factoring and a line side by side as APR-equivalents, tell you which you qualify for today, and map the switch if a line is the better long-term fit.

Check My Options →
Soft credit pull to review options. Select Loan Advisors is not a lender.